Güde GUS 650 Mode D'emploi page 14

Troubleshooting
Failure Cause
Poor sharpening Grinding disk is
results worn out
Maintenance table
Before you Check the grinding disk, feeder cable
start working and the entire appliance for any
damage.
After you stop After you stop using the multi-
working purpose sharpener, wipe it with a
well-wrung cloth so that the surface
and ventilation slots are always free
of dust and any impurities.
EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstrasse 6
D-74549 Wolpertshausen
Deutschland,
herewith declare that the following appliance complies with
the appropriate basic safety and health requirements of
the EU Directives based on its design and type, as brought
into circulation by us.
In case of alternation of the machine, not agreed upon
by us, this declaration will lose its validity.
Machine description:
GUS 650
Article No.:
#94102
Applicable EU Directives:
2006/42/EG
2006/95/EG
2004/108/EG
Applicable harmonised standards:
EN 61029-1:2009
EN 61029-2-4:2003+A1:03+FprAB:09
EN 61029-2-4:2003+A1:2003
EN 55014-1:2006
EN 55014-2:1997/+A1:2001/+A2:2008
EN 61000-3-2:2006
EN 61000-3-3:2008
Place of certification:
Intertek Deutschland GmbH
Max-Eyth-Straße 14
70771 Leinfelden-Echterdingen
Germany
Reference number:
10SHW0133-01
Date/authorised signature:
Title of signatory:
Technical documentation:
Removal
Grinding disk to
be replaced
22 Feb, 2011
Managing Director
Mr Arnold
J. Bürkle FBL; QS