dji Ronin-S Guide De Démarrage Rapide page 8

RONIN-S Quick Start Guide
2. Balancing Depth for the Tilt Axis
a. Rotate the tilt axis so that the camera lens is pointing forward. Hold the tilt motor to check if the
camera is top or bottom heavy.
b. Toggle the lever
stays still when rotating the tilt axis 45° upwards or downwards.
c. Toggle the lever
3. Balancing the Roll Axis
a. Release the tilt motor to check the direction in which the motor swings.
b. Loosen the roll axis knob
adjustment on this axis is too stiff, you can try to relieve the weight on the roll motor by either
lifting up on the camera platform while making an adjustment or tilt the gimbal back a little until
the roll arm is parallel with ground.
c. Tighten the knob.
©
6
2018 DJI OSMO All Rights Reserved.
to the unlocked position. Adjust the camera balance
1
to the locked position.
3
1
2
and adjust the camera balance
1
2
until the camera
2
until the camera stays still. If the
2
1
3