KOBE PREMIUM IN-026 Série Manuel D'installation page 16

If Speed/Delay Shut-Off Control button (
automatically exit Delay Shut-Off mode, and the
control.
When Delay Shut-Off is activated, the fan will automatically turn off after the set time. Delay Shut-
Off ranges from 1 min. to 99 mins.
ECO Control
To activate ECO when the unit is powered off, press the ECO Control. The ECO icon will be
displayed to show that it is active. To deactivate it, press the ECO Control again. The icon will
turn off, indicating it has been deactivated.
To activate ECO when the unit is powered on, press the ECO Control. The ECO icon will be
displayed to show that it has been activated. In order for ECO to take effect, the unit must
be turned off. If the fan is running, power it off by pressing the Power Control. Then press
the Power Control again to power down the unit. Once the unit is powered off, the ECO icon
will remain displayed to indicate that it is active. To deactivate it, press the ECO Control
again. The icon will turn off, indicating it has been deactivated.
For optimal performance, clean the range hood surface and baffles regularly.
To Clean Hood Surface
CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.
*** Regular care will help preserve its fine appearance.
1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth.
2. If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface of
the hood. Avoid getting cleaning solution onto or into the control panel. Follow directions of the
stainless steel cleaner. Caution: Do not leave on too long as this may cause damage to
hood finish. Use soft towel to wipe off the cleaning solution, gently rub off any stubborn spots.
Use dry soft towel to dry the hood.
3. DO NOT allow deposits to accumulate or remain on the hood.
4. DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface
and cause rusting.
5. DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact
with stainless steel for extended periods. Many of these compounds contain chemicals, which
may be harmful. Rinse with water after exposure and wipe dry with a clean lint free cloth.
To Clean Baffle Filter/Oil Tunnel
CAUTION: DRAIN OIL FROM BAFFLE FILTER & OIL TUNNEL REGULARLY TO PREVENT
OVERFLOW.
1. Remove all the baffle filters and oil tunnel.
2. Using a sponge, wash with warm soapy water. Dry completely before returning into place.
CAUTION: SHARP EDGES
(Note: Baffle Filters are top rack dishwasher safe.)
OR ) is not pressed within 6 seconds, the unit will
arrow will return to speed function
14