Petsafe Drinkwell PWW17-16560 Guide De Démarrage Rapide page 6

Assemble Pet Fountain
1. Rinse all fountain components (except for the
adaptor) with warm water before use. This will
remove any residue from the manufacturing
process. Place the foam filter inside the bowl
as shown.
2. Place the pump inside the foam filter on the
bottom of the bowl with the power cord closest to
the hole on the back of the bowl. Press down on
the pump to engage the suction cups.
3. Once the pump is securely in place, feed the
power cord through the hole on the back of the
bowl and out the notch on the bottom of the bowl.
4. Remove the slack from the power cord and push
the rubber gasket on the power cord firmly into
the hole.
6
1
2
3
4
petsafe.com