Petsafe Drinkwell PWW17-16560 Guide De Démarrage Rapide page 10

Pump Cleaning
1. Remove the faceplate. You may need to use a
fingernail or another slim object to pry it off.
2. Remove the yellow, teardrop-shaped intake plate
by pulling the small tab away from the pump.
3. Remove the impeller (white, 3-bladed propeller)
by holding one of the blades and pulling it
out of the pump. The impeller is held in place
magnetically and you will experience a slight
resistance when removing this piece. Clean the
pump parts with warm water and soap, rinse well,
then reassemble.
Replacement Parts and Accessories
Replacement parts, filters and cleaning kits for your pet fountain can be purchased by visiting
www.petsafe.com or by contacting our Customer Care Centre. For a listing of Customer Care Centre telephone
numbers, visit our website at www.petsafe.com.
10
1
2
3
petsafe.com