Hitachi WR 12DH Mode D'emploi page 6

English
The most suitable temperature for charging is that
of 20 – 25°C.
11. Do not use the charger continuously.
When one charging is completed, leave the charger
for about 15 minutes before the next charging of
battery.
12. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
13. Never disassemble the rechargeable battery and
charger.
14. Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great
electric current and overheat. It results in burn or
damage to the battery.
MODEL
WR12DH: with charger and case
SPECIFICATIONS
POWER TOOL
Model
No-load speed
Capacity
Tightening torque
Rechargeable EB12B (2.0 Ah)
battery EB12H (2.2 Ah)
Weight
CHARGER
Model
Charging time
Charging voltage
Weight
STANDARD ACCESSORIES
1. Charger (UC14YF or UC14YF2) .............................. 1
2. Plastic case ................................................................ 1
Standard accessories are subject to change without
notice.
5
WR12DH
0 – 2200/min
M5 – M14 (Ordinary bolt)
M6 – M10 (High tension bolt)
Maximum 1200 kg-cm
Tightening is M14 high tension bolt (strength grade 12.9), when
fully charged at 20°C temp. Tightening time: 3 sec.
Ni-Cd battery, 12V
Ni-MH battery, 12V
1.7 kg
UC14YF / UC14YF2
EB12B Approx. 60 min. (at 20°C)
EB12H Approx. 70 min. (at 20°C)
7.2 – 14.4V
1.3 kg
15. Do not dispose of the battery in fire.
If the battery burnt, it may explode.
16. Do not insert object into the air ventilation slots
of the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
17. Bring the battery to the shop from which it was
purchased as soon as the post-harging battery life
becomes too short for practical use. Do not dis-
pose of the exhausted battery.
18. Using an exhausted battery wil damage the
charger.