Publicité
Les langues disponibles
Les langues disponibles
Commands:
Read carefully the Operating
Instructions. Learn carefully
how the appliance is used
before using it.
Environment protection:
Dispose waste professionally
so as not harm the
environment.
Any defective and/or
disposed electric or electronic
devices must be delivered to
respective collection centres.
Package:
Protect against moisture
Interseroh-Recycling
Technical specifications:
Connection
Vacuum
Tank capacity
Training
Please read carefully the Operating and servicing
instructions. Familiarise thoroughly with the controls and
proper use of the appliance. You must know how the
appliance works and how to switch the controls
immediately off. Never let children work with the appliance.
Never let adults work with the appliance if not trained
properly. Do not let any persons, especially small children
and pets, to the place of your work. Be careful to prevent
any slipping or falling down.
Packing cardboard
material may be delivered
to collecting centres for
recycling.
This side up
Engine output
Nominal width of
accessory equipment
Weight
Use as designated
The appliance has been designed for sucking and blowing
of harmless and non-flammable liquids. Use the vacuum
cleaner only when knowing all of its functions and when
you are able to use them with no limitation or after
receiving appropriate instructions.
The appliance cannot be used for works other than for
which the appliance has been designed and that are
specified in the Operating Instructions. Any other use will
be considered a use in conflict with the designation. The
manufacturer will not be liable for any consequential
damage and injuries. Please be sure to know that the
appliance has not been designed for industrial purposes.
Assembly (picture 1)
Pull the plug out of socket before any work on
the vacuum cleaner.
Installing the guide wheels (pic. A.1 – A.5)
•
Take the appliance out of the package.
•
Open the closures and remove the upper part of
the vacuum cleaner.
•
Fit the guide wheels in appropriate holes
underneath the vacuum cleaner.
Fitting the foam filter (wet vacuuming only)
(pic. A.6a)
•
Fit the foam filter on the bag.
Changing/fitting the paper filter bag
(dry vacuuming only) (pic. A.6b)
•
Pull the dust bag off the connecting flange to the
back. Close the dust bag opening by tipping the
cover. Remove the closed dust bag off the vacuum
cleaner.
•
Fit a new dust bag on the connecting flange of the
vacuum cleaner. Make sure the dust bag fits tightly
along its entire length to the inner tank wall. Fit in
the upper part of the vacuum cleaner.
•
Close the closures.
Installing/removing the suction hose (pic. A.9 + A.10)
•
Insert the suction hose in the hose fixture and
secure it by turning clockwise.
•
Push the suction tubes firmly into each other.
•
To remove the suction hose, turn it counter-
clockwise and take it out.
Operation
Putting the appliance into operation
Respect the system voltage! The current source
voltage must correspond to the details on the vacuum
cleaner type label. Vacuum cleaners labelled 220-240V
may also be plugged to 220V.
Safety switch against stray current to be
necessarily used. Using a safety switch against stray
current reduces the risk of electric shock.
CAUTION! The vacuum cleaner is not suitable for
vacuuming dangerous dust. Do not use the vacuum
cleaner to vacuum flammable or explosive liquids, e.g.
petrol, oil, alcohol, solvents. Do not vacuum hot or
9
Publicité
