Güde NTS 1200 Traduction Du Mode D'emploi Original page 11

Any servicing work not explicitly specified in this manual
must be performed by a professional as there may be
dangerous situations the operator is unable to handle.
Spare parts may only be replaced by a professional.
Tank
From time to time, wipe the tank with a common, non-
abrasive cleaning agent and let it dry out.
Foam filter
After wet vacuuming, wash the foam filter in fine solution
and let it dry out.
Troubleshooting
The table shows possible failures and their remedies.
Pull the plug out of socket before any work on the
vacuum cleaner.
Failures
Inadequate suction power
Regular emptying guarantees optimum suction power. If
the suction power is still not adequate, you should ask a
professional to help you.
EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstrasse 6 D74549 Wolpertshausen
Germany,
hereby declare that the design of the appliances below
corresponds to the applicable requirements of the basic
EU safety and hygiene directives.
In case of alternation of the appliance, not agreed
upon by us, this Declaration will lose its validity.
Appliance description:
NTS 1200 WET/DRY VACUUM CLEANER
Art. No.
#16713
Applicable EU Directives:
2004/108/EG
2006/95/EG
Applicable harmonised standards:
EN 55014-1:2006
EN 55014-2:1997/+A1:2001
EN 61000-3-2:2006
EN 61000-3-3:1995/+A1:2001/+A2:2005
EN 60335-2-2:2003+A1:04+A2:06
EN 60335-1:2002+A11, A1:04+A12, A2:06+A13:08
EN 62233:2008
Date/authorised signature:
Title of signatory:
Technical documentation:
Remedy
Is the upper part of the
vacuum cleaner fitted
properly?
Is the hose system
obstructed?
Are the suction tubes
connected firmly and
properly to each other?
Is the tank full?
Is the dust bag full?
22 August 2011
Managing Director
Mr Arnold
J. Bürkle FBL; QS
11