Maintenance And Use - PowerPeak FRM8303P Mode D'emploi

MAINTENANCE AND USE
• This device requires a regular check‐up to prevent physical injury. This means that bolts and nuts
should be frequently checked for cracks and sharp edges etc.
• Defective components must be replaced immediately. If this is not possible, the device must be put
out of order until the necessary repairs have been made.
• Clean only with a damp cloth, do not use solvent cleaners.
• This product is intended for use in clean, dry conditions. You should avoid storage in excessively cold
or damp places as this may lead to corrosion and other related problems.
Adjusting resistance
The resistance of the shocks can be adjusted by twisting the adjustment knob at the top of the shocks.
There are settings from 1 to 12. Setting 1 will provide the lowest resistance. Setting 12 will provide the
highest resistance.
Caution: The shocks get hot after a few minutes of use.
If the resistance level is adjusted, for example from position 1 to position 3, you will notice the change in
resistance after a few rowing movements. This is due to the build‐up of pressure in the cylinder.
Storage
See figure below. You can place the rowing machine on its top side for easy storage.
24