Adjusting The Handle-Bar; Adjusting The Saddle; Maintenance - Vermeiren 2102 Mode D'emploi

ADJUSTING THE HANDLE-BAR

The height and angle of the handle-bar can easily be adjusted.
Unscrew the bolt of the steering tube until +/- 8mm of the head of the screw can
be seen.
Ligthly tap the bolt into the steering tube with a metal hammer.
When the steering tube loosens, the height and the angle of the handle-bar can
be adjusted.
Beware not to pull the steering tube too far out of the fork. The mark on the steer-
ing tube should not be visible.
When the handle-bars are at the desired height and angle, retighten the bolt of
the steering tube.

ADJUSTING THE SADDLE

The height of the saddle can be adjusted by unscrewing the clamping screw on
the frame of the tricycle.
Retighten the clamping screw when the saddle is at the desired height.

MAINTENANCE

MONTHLY
Check the max. tire pressure (see table page 12) and the condition of the tires.
THREE-MONTHLY
Make sure all bolts and screws are well-tightened.
The chrome-plated parts can be cleaned with a soft cloth and/or polished with
a chrome-cleaning product.
Periodically grease the chain.
- 9 -