Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL SPECIFICATION
Voltage rating:
Power consumption:
Sizes SF2007C:
Weight SF200C:
OPERATING INSTRUCHTIONS
1)
ON / OFF SWITCH
I
When pressing down the switch (button down),
the indicator will light up and the heater
operates.
II
After pressing the switch again (button up),
the power indicator gets off and the heater
does not operate anymore.
2)
ENERGY SWITCH
Energy consumption 2000 Watt
Energy consumption 1200 Watt
Energy consumption 600 Watt
Fan, cold air.
3)
TEMERATURE CONTROL KNOB
This rotary knob is to regulate the heat in order
o maintain a desired temperature. When the room
temperature is lower than the temperature setting
on the knob, the heater will function and heat up the
room until the desired temperature is attained.
4)
TIP-OVER SWITCH
The function is to turn the heater off if it is accidentally knocked off.
OPERATION
1)
Please read all the instructions before using the heater.
2)
Take off all the packing materials.
3)
Press the power switch to the 'off'-position (button up),
then turn temperature control knob to minimum position
4)
Plug the power cord into an electrical outlet, 230V.
5)
Put the Energy Switch in the required position.
6)
Press the on/off-switch 'on' (button down). The power indicator will light up and
the heater starts up.
7)
Turn the temperature control knob in clockwise direction until the heater turns
on. Slowly turn the knob counter clockwise until the heater shuts off. The
heater will automatically maintain this temperature. For a lower temperature,
rotate the knob further counter clockwise. For a higher temperature, rotate
the knob clockwise.
230 Volt AC, 50 Herz
600 Watt / 1200 Watt / 2000 Watt
18,5(L) x 15,0(W) x 22,0(H)
2,10 kg
Publicité
