Table des Matières
Publicité
Important notes for users in the U.K.
Mains fuse
This information applies only to products with a UK mains plug.
This product is fitted with an approved non-molded plug. If you replace the fuse, use one with:
•
the ratings shown on the plug,
•
a BS 1362 approval, and
•
the ASTA approval mark.
Contact your dealer if you are not sure about what type of fuse to use.
Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the
power cord.
How to connect a plug
The wires in the power cord are colored as follows: blue = neutral (N), brown = live (L).
If the colors do not correspond with the colors on your plug, identify the terminals in your plug as
follows:
1
Connect the blue wire to the terminal marked N or colored black.
2
Connect the brown wire to the terminal marked L or colored red.
3
Do not connect either wire to the earth terminal in the plug, marked E (or e) or colored green (or
green and yellow).
Before you replace the plug cover, make sure that the cord grip is clamped over the sheath of the cable
and not just over the two wires in the cable.
Publicité
Table des Matières
