Publicité
C
1.
1-5
............................................................................................ 173
.......................................................................................................... 173
2.1
............................................................................................................... 173
2.2
................................................................................................................ 173
2.3
............................................................................................................... 174
2.4
/
............................................................................................................... 174
2.5
............................................................................................................... 174
2.6
................................................................................................................ 175
2.7
....................................................................................................................... 175
2.7.1
x ....................................................................................... 175
2.7.2
y ...................................................................................... 176
2.8
................................................................................................................ 176
2.8.1
................................................................................. 176
2.8.2
.......................................................................................... 177
2.8.3
................................................................................................ 177
........................................................................................... 177
3.1
............................................................................................................... 177
3.1.1
............................................................................................. 177
3.1.2
........................................................................................................ 177
3.2
................................................................................................................ 178
3.2.1
............................................................................................ 178
3.2.2
......................................................................................................... 178
3.3
....................................................................................................................... 179
3.4
................................................................................................................ 179
3.5
....................................................................................................................... 180
4.
................................................................................................................. 180
.......................................................................................................... 180
5.1
................................................................................................ 180
5.2
............................................................................................ 181
5.3
....................................................................................................... 181
5.4
..................................................................................................... 181
6.
................................................................................................................. 182
7.
CE
................................................................................................ 182
172
2.8.2 Setting a blind rivet nut
•
Insert the screwed-on blind rivet nut as far as it will go into the rivet hole.
•
Press and hold switch K until the setting and automatic screw-on procedure is finished.
2.8.3 Changing the threaded mandrel (Fig. 3)
•
Unscrew nosepiece B.
•
Push back slide M as far as it will go.
•
Unscrew threaded mandrel A and change.
•
Align the surfaces of the hexagon on the screwed-in threaded mandrel 1 with the
surfaces of the hexagon of the holder.
•
Lock the threaded mandrel A by pulling the slide M forward as far as it will go.
•
Screw on matching nosepiece B, set threaded mandrel length x (see Point 2.7.1) and
secure nosepiece B with lock nut C to prevent it turning.
3.
Quick charger and battery
Technical data
3.1
3.1.1 Quick charger
Type:
12355/12356
Input voltage:
220-240 V~ / 50-60 Hz
Output voltage:
14.4 V
Output current:
1.5 A max.
Weight:
0.6 kg
3.1.2 Rechargeable battery
Rated voltage:
14.4 V
Number of cells:
4/8
Type of cells:
Li-ion
Capacity:
1.3 Ah / 2.6 Ah
Weight:
0.35 kg / 0.5 kg
GB
23
Publicité
Chapitres
Dépannage
