Nosepiece Allocation; Start-Up; Setting The Threaded Mandrel Length X - RIVIT RIV 790 Mode D'emploi

C
M10 M10
/
M6
M4 M5
M3 M8
230 V 50 Hz
14.4 V
2.3 kg
5.5 mm
14.4 V
13,000 N
L 76.5 dB (A),
PA
<2.5 m/s²,
174
M10
SW4
K=3 dB
K=1.5 m/s²
Threaded mandrels/nosepieces
2.6
Thread size Material
Threaded mandrel
Aluminium
M3
Steel
Aluminium
M4
Steel
Aluminium
M5
Steel
Aluminium
M6
Steel
Aluminium
M8
Steel
M10 Aluminium

Start-up

2.7
Before starting the riveting tool, read and observe the operating instructions as well as safety
information and keep in a safe place.
• Insert fully charged battery in correct position into the blind rivet nut setting tool.
• Select nosepiece and threaded mandrel from Table 2.6 and screw on (M6 in working
position).
Caution!
The air inlets for the motor must not be obstructed; do not insert any objects into them.
2.7.1
Setting the threaded mandrel length x (Fig. 2)
• Set the threaded mandrel length x to the blind rivet nut length by turning the nosepiece B.
• Fully utilise the thread depth of closed blind rivet nuts (Fig. 2; 4).
• Secure setting of nosepiece B with lock nut C.
Part No.
Nosepiece
1551700 1552300
1551800 1552400
1551900 1552500
1552000 1552600
1552100 1552700
1552200 1552800
GB
21