Transport, Packaging And Storage - WIKA PG43SA-D Mode D'emploi

3. Safety / 4. Transport, packaging and storage
3.6 Personnel qualification
EN
Skilled personnel
Skilled personnel, authorised by the operator, are understood to
be personnel who, based on their technical training, knowledge
of measurement and control technology and on their experience
and knowledge of country-specific regulations, current standards
and directives, are capable of carrying out the work described and
independently recognising potential hazards.
3.7 Labelling, safety marks
Dial

4. Transport, packaging and storage

4.1 Transport
Check the measuring instrument for any damage that may have been
caused by transport.
Obvious damage must be reported immediately.
10
WIKA operating instructions disphragm pressure gauge, model PG43SA-D
WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and
damage to equipment.
▶
The activities described in these operating instruc-
tions may only be carried out by skilled personnel
who have the qualifications described below.
Warning indicator
Colour change of the status display to
the red warning dot indicates a fault. See
chapter 6 "Faults".