Specifications; Design And Function; Transport, Packaging And Storage - WIKA 632.50.100 Mode D'emploi

3. Specifications ... 5. Transport, packaging and storage

3. Specifications

Pressure limitation
Model 63X.50: Steady:
GB
Model 632.51: Steady:
Temperature effect
When the temperature of the measuring system deviates from the reference
temperature (+20 °C): max. ±0.6 %/10 K of full scale value
IP ingress protection
Housing (EN 60529/IEC 60 529)
IP 54 (IP 65 with liquid-filled gauges)
For further specifications see WIKA data sheet PM 06.03, PM 06.06 and the order
documentation.

4. Design and function

Description
Nominal size 63, 100 and 160 mm
„
The gauges measure the pressure by means of resilient capsule pressure
„
elements
The measuring characteristics are in accordance with the EN 837-3 standard
„
Scope of delivery
Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport
Check pressure gauge for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g.
change in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage
Storage temperature: -20 ... +70 °C (optional: -40 ... +70 °C)
„
8
full scale value
Fluctuating: 0.9 x full scale value
Short time: 1.3 x full scale value
full scale value
Fluctuating: 0.9 x full scale value
Short time: 50 x full scale value
WIKA operating instructions pressure gauge model 6 per ATEX