Information On The Product; Information On The Manufacturer; Machine Identification; Technical Data - Mafell ZAF 250 VARIO Traduction De La Notice D'emploi Originale

1

Information on the product

on the machine with art. no. 991201

1.1 Information on the manufacturer

MAFELL AG
Beffendorfer Straße 4, D-78727 Oberndorf/Neckar
Phone +49 (0)7423) 812-0, fax +49 (0)7423) 812-218

1.2 Machine identification

All data required for identification of the tenon cutting machine are located on the type la-
bel at the machine base.
CE sign for documentation of the conformance with the basic safety and
health requirements according to Annex I of the Machine Directive.
Read the Operating Instructions carefully to reduce the risk of injury.

1.3 Technical data

Maximum timber dimension (width x height) for
– tenon cutting at right angle
– tenon cutting with maximum inclination of 60°
– flattening at right angle and maximum tilt angle of 45°
Maximum tendon length
Maximum flattening in one process step
Maximum flattening depth
3-phase alternating current motor
– rated input power (regular load)
– rated output power (regular load)
– rated current (regular load)
500 x 250 mm (19 11/16 x 9 27/32 in.)
220 x 250 mm (8 21/32 x 9 27/32 in.)
340 x 250 mm (13 25/64 x 9 27/32 in.)
– 25 –
110 mm (4 3/8 in.)
110 mm (4 3/8 in.)
80 mm (3 1/8 in.)
400 V ~, 50 Hz
6000 W
4500 W
10.4 A