Setting Up The Weighing Platform; Selecting The Site Of Installation - Mettler Toledo PBD555 Manuel Utilisateur

2
2.1
09/13 Order number 22023813A

Setting up the Weighing Platform

Selecting the Site of Installation

The surface must be able to bear the weighing platform
➜
under maximum load at the points of support. At the
same time it should be so stable that no vibrations
arise during weighing. This is also to be observed
when installing the weighing platform in conveyor and
similar systems.
If possible, platform installation should be located in
➜
an area free from vibration.
Ambient Conditions
Observe the following ambient conditions:
➜
– No wet and/or corrosive environments
– No direct sunshine
– No strong draught
– No excessive temperature fluctuations
– Temperature range –10 °C to +40 °C
– No wind or ventilation
User Manual PBD555 and PBK785
METTLER TOLEDO
7