Titan PR 33 Notice D'instruction page 29

Original
Use only original TITAN closure sleeves!
TITAN
Do not exceed air pressure!
max. 6,0 bar
Never exceed the max. permissible air pressure of 6 bar.
Use original connection coupling.
Use only connection couplings that comply with the safety
regulations.
Do not use gas or compressed air cylinders!
Do not connect the tool to a gas or compressed air cylinder.
The use of straps other than those recommended can result in
broken straps during the tightening process and insufficient
strapping. Use only corresponding quality products from
TITAN!
This device may be operated only by personnel who have been
trained accordingly. Please consult your TITAN packing
consultant if you have any questions about this.
Workplace
Always maintain an orderly workplace. A disorderly workplace
can cause accidents. When operating the crimper, make sure
that you are in a well-braced position in order to maintain
optimum balance and prevent the risk of falling.
Never operate the tool in an awkward working position!
Maintenance
In order to operate safely, the tool must be properly maintained.
Check the condition of your tool regularly for defects or worn
parts. Never use a tool that has defects or worn parts.
Modifications to the tool are strictly prohibited. Failure to comply
with this regulation can result in serious injury.
PR33/DPZ-L
29 / 63
H365 EU 24/12