Problems That Can Be Resolved Before Calling The Customer Service Centre - Electrolux ECG6200 Mode D'emploi

822_949_387 ECG6200_Elux.book Seite 105 Sonntag, 27. Januar 2008 11:07 23
The symbol
• The waste coffee container has proba-
bly not been replaced after cleaning.
0 Open the service door and insert the
waste coffee container.
The symbols
flashing
• With the ground coffee function
selected, ground coffee has not been
poured into the ground coffee filler.
0 Add the ground coffee as described in
chapter „Using pre-ground coffee",
page 98.
All coffee strength symbols
and
• The coffee beans have run out.
0 Fill the coffee bean container, see „Fill-
ing the coffee bean container",
page 93
• If the coffee grinder is very noisy, this
could mean a small stone in the coffee
beans has blocked the grinder.
0 Contact the Customer Service Centre.
Blocking or damage caused by for-
eign objects in the grinder might be
excluded from the guarantee.
The symbol
• This indicates the presence of limescale
in the appliance.
0 The descaling procedure, described in
the section „Running the descaling
program", page 103, needs to be per-
formed as soon as possible.
The symbol
• The service door is open.
0 Close the service door. If the service
door cannot be closed, check that the
brewing unit is inserted correctly (see
„Cleaning the brewing unit", page 102).
The symbol
• The brewing unit has probably not
been replaced after cleaning.
0 Insert the brewing unit; see „Cleaning
the brewing unit", page 102
is flashing
or and are
are flashing
15
is on steady
is on steady
is flashing
• The inside of the appliance is very dirty.
0 Thoroughly clean the inside of the
appliance; see „Cleaning the brewing
unit", page 102. If the message is still
displayed after cleaning, contact the
Customer Service Centre.
The symbol is on steady
• This indicates a general alarm.
0 Contact the Customer Service Centre.
The symbols and
• The machine has been switched on
with the steam knob in open position
.
0 Turn the steam knob clockwise (Fig. 10)
as far as it will go, to the position
The symbols and
• The ambient temperature is too low to
operate the applience.
0 Use the appliance in a warmer room.
Problems that can be
resolved before calling the
Customer Service Centre
If the appliance is not working, the
causes of the malfunction can be iden-
tified and resolved by referring to
chapter „What to do if you see the fol-
lowing symbols on the display ...",
page 104. If, on the other hand, no
symbol is displayed, run the following
checks before calling the Customer
Service Centre.
The coffee is not hot
• The cups have not been preheated.
0 Pre-heat the cups by rinsing them in
hot water or leaving them for at least
20 minutes on the heated cup rack (H)
(see „Tips for making hotter coffee",
page 97).
The coffee is not creamy enough
• The coffee is ground too coarsely.
0 Turn the knob for setting the grinding
texture one click anticlockwise whilst
the grinder is grinding beans for the
g
are flashing
.
are flashing
105