Vermeiren Inovys II Manuel D'utilisation page 14

EN
NL
5
[5]
• Hold the leg rest (5) sideways and hang it
in the footrest support (39). Make sure
that the leg rest hole (44) fits over the
lower support part and that the leg rest pin
(38) is inserted in the top support.
•
Swing the leg rest (5) inwards until it clicks
in position.
•
Repeat for the second leg rest.
40
[7]
• Swing the calf rest support (40) inwards.
• Turn the calf rest (8) to the back.
• Repeat this for the second calf rest.
Your wheelchair is now ready for use.
2.4.5 Disassembly
CAUTION
• Make sure that your fingers, clothes, buckles won't get entrapped during disassembly.
• Always keep the swing range of the footrest in mind to prevent bystanders from being injured or
objects from being damaged.
38
39
44
8
Risk of injuries or damage
6
[6]
• Swing the footplate (6) downwards.
• Repeat for the second footplate.
41
42
[8]
• (If applicable) mount the headrest (1) with
the square tube in the headrest support
(41) on the backrest.
• Turn the star knob (42) finger tight.
10
Inovys II
2022-03
Before use
1