Safety Instructions - all-clad EZ CLEAN NC00142377 Guide De L'utilisateur

• Before use, check that your local voltage corresponds with the specifications shown on the appliance nameplate
located under the fryer.
• Only connect the appliance to electrical sockets which have a minimum load of 15A. If the sockets and the plug
on the appliance should prove incompatible, get a professionally qualified technician to replace the socket with
a more suitable one.
• This electrical equipment operates at high temperatures which may cause burns. Do not touch the filter, window,
metal walls (depending on model), or other apparent metal parts.
• To ensure safe operation, oversized foods must not be inserted into the fryer.
• Ensure that the lid and bowl are completely dry after washing and before use.
• The oil level must always be between the Min. and Max. markings.
• Do not overload the basket. For safety reasons never exceed the maximum quantity.
• Never operate your fryer without any oil.
• The cooking times are given as guidelines only.
• The oil must be filtered regularly and changed after 8 to 12 uses.
• Do not mix different types of oil.
• If you use solid vegetable shortening, cut it into pieces and melt it over low heat in a separate pot beforehand,
then slowly pour it into the deep fryer pot. Never put solid shortening directly into the deep fryer pot or basket,
as this will lead to deterioration of the fryer.
• If the fryer has a removable pot, never remove it while the deep fryer is on.
• This model is equipped with a permanent metallic filter, which does not need to be changed.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
4
S A F E T Y I N S T R U C T I O N S