Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
In order to avoid water being added to the oil :
•
Please respect carefully the safety and usage recommendations contained in the Instructions For Use.
•
Use your fryer away from water splashes.
•
Dry the food thoroughly before cooking.
•
Make sure that the lid filter is clean, so as to always allow the free circulation of the steam.
•
When you open the lid, be careful not to let the condensation drops fall into the oil.
•
Ensure that the oil box is clean and dry before draining and filtering the oil.
•
Never store the oil box full of oil in the refrigerator or freezer.
•
Always store the oil box in the horizontal position, with lid closed, in a dry place.
•
After each cleaning of the bowl, press on the filtration valve of the oil filtration system located under the bowl.
•
Dry all the cleaned parts thoroughly before reassembling and storing the fryer.
•
Never store your fryer outside. Choose a dry and well-ventilated place.
•
Your appliance is equipped with an overheating security feature located in the back of the control unit.
•
If you use your fryer without oil, the safety cut-off is activated and the appliance will shut off automatically.
•
In this case, unplug the appliance and let it cool (about 15 minutes).
•
After the bowl has been filled with oil, press the safety cut-off RESET button with a toothpick or similar non-
metallic object – fig.16. Then, plug the appliance in.
•
If the problem with the safety cut-off persists, please call our consumer service center (see details on page 19).
18
I M P O R T A N T
R E S E T F U N C T I O N
Publicité
Chapitres
Table des Matières
