Weidmüller WAVECONTROL VMR 1ph Notice D'utilisation page 17

The switching point is set via a potentiometer (located under the
front plastic cover).
Functions:
- High Trip:
- Low Trip:
- Memory on:
- Memory off:
- Hysteresis, small: Pickup and release delay of 5V/8V
- Hysteresis, large: Pickup and release delay of 10V/16V
- AC voltage:
- DC voltage:
The relay switches when the set operating
point is exceeded
The relay switches by underflow of the set
operating point
The output alarm status is retained; it can
be reset via an internal pushbutton or
external reset input
The alarm status is not stored
depends on the range set
depends on the range set
AC voltage measurement of the input
signal
DC voltage measurement of the input
signal
15