Prowork PBS 1835 Mode D'emploi page 16

Anleitung PBS 1835 SPK1
GB
GENERAL INFORMATION
2
5
9
16
18
15
4
8
21 20
19
1. Chain bar 9.
2. Saw chain 10. Stop switch
3. Chain tensioning screw 11. Safety lock
4. Spark mesh(inside exhaust) 12. Oil tank cap
5. Chain brake lever / front hand 13. Fan housing
guard 14. Fuel tank cap
6. Front handle 15. Rear handle / bootstrap
7. Starter handle 16. Operating switch
8. Spark plug 17. Choke / (carburetor setting)
Numbers preceding the descriptions correspond with the numbers on preceding page to help you locate the safety
feature.
2 LOW KICKBACK SAW CHAIN helps significantly
reduce kickback, or the intensity of kickback, due to
specially designed depth gauges and guard links.
5 CHAIN BRAKE LEVER / HAND GUARD protects the
operator's left hand in the event it slips off the front
handle while saw is running.
5 CHAIN BRAKE is a safety feature designed to
reduce the possibility of injury due to kickback by
stopping a moving saw chain in milliseconds. It is
activated by the CHAIN BRAKE lever.
10 STOP SWITCH immediately stops the engine when
tripped. Stop switch must be pushed to ON position
to start or restart engine.
11 SAFETY TRIGGER prevents accidental acceleration
of the engine. Throttle trigger (19) cannot be
squeezed unless the safety latch is depressed.
20 CHAIN CATCHER reduces the danger of injury in
the event saw chain breaks or derails during
operation. The chain catcher is designed to intercept
a whipping chain.
16
28.04.2006 9:03 Uhr Seite 16
6
14
1
3
22
13
23
Air filter cover 18. Bar fastening nut
19. Throttle lever
20. Chain catch
21. Exhaust cover
22. Stop claw
23. Chain guard
SAFETY FEATURES
NOTE: Study your saw and be familiar with its parts.
7
17
10
11
12