Description Of The Device - Trotec MultiMeasure BASIC BP10 Manuel D'utilisation

Description of the device

Functional description
The infrared thermometer BP10 uses an infrared sensor
to measure surface temperatures without contact. So
that you can accurately see where the device is measu-
ring, a built in laser pointer can be switched on. The de-
vice can show either the highest or lowest value of the
measurement. For the maximum or minimum value, a
temperature alarm can also be set.
B - 6
1. IR sensor
3. "Set" button
5. "Laser" button
Operating manual - Infrared thermometer BP10
6
5
2. "Meas" button
4. Display
6. Laser pointer
1
2
3
4
EN