Trotec MultiMeasure BASIC BP10 Manuel D'utilisation page 26

Temperature measurement settings
With the "Set" button (3), you can switch between the
settings for temperature measurement. The order is the
same as in the following description. Confirm the entries
with the "MEAS" button (2).
B - 10
Changing the display - Minimum/Maximum
The "Max" symbol (14) is shown. Press the "Laser"
button (5) to change between Min and Max.
Changing the display °C - °F
The "°C" and "°F" symbols (10) flash. Press the "Laser"
button (5) to change between the units for the measured
values.
Operating manual - Infrared thermometer BP10
EN