Trotec MultiMeasure BASIC BP10 Manuel D'utilisation page 28

Increase temperature alarm
The "HI" symbol (7) is shown.
An arrow (13) is shown.
Press the "Laser" button (5) to increase the highest
value.
Decrease temperature alarm
The "HI" symbol (7) is shown.
An arrow (13) is shown.
Press the "Laser" button (5) to decrease the maximum
value.
B - 12
Temperature alarm on/off
The "Temperature alarm" symbol (8) appears.
The "Off" message appears in the display.
Press the "Laser" button (5) to switch on the tempera-
ture alarm.
The "On" message appears in the display.
Press the "Laser" button (5) again to switch off the tem-
perature alarm.
The "Off" message appears in the display.
Operating manual - Infrared thermometer BP10
EN