Technical Data; Description Of The Device - Trotec BP15 Manuel D'utilisation

Technical data

Model
Weight
Dimensions H x W x D
Measuring range
Accuracy
Measuring range resolution
Operating temperature
Relative humidity during
operation
Laser output
Laser class
Degree of emission
Distance to measuring spot
diameter ratio
Reaction time
Power supply
Switch off
EN
BP15
127 g
135 x 95 x 28 mm
-30 °C to 260 °C (-22 °F to 500 °F)
±2 % (±4 °F) or 2.0 % of the measured value
(the higher value applies)
0.1 °C / °F
0 °C to 50 °C (32 °F to 122 °F)
Max. 80 % relative humidity
< 1 mW (630–670 nm)
ll
0.95
8:1
< 1 s
9 V battery
After approx. 8 seconds of non-use

Description of the device

Functional description
The infrared thermometer BP15 uses an infrared sensor to
measure surface temperatures without contact. So that you can
accurately see where the device is measuring, a built in laser
pointer can be switched on. The device can show either the
highest or lowest value of the measurement.
7
6
5
1. Laser pointer
3. "°C/°F" key
5. "Laser" key
7. Display
Display
13
12
8. Degree of emission
9. Unit of the temperature
10. Battery indicator
11. Maximum or minimum value from the last measurement
12. Shows the maximum or minimum value
13. Temperature display
14. Measurement is on
15. Display is frozen
16. Laser pointer on
Operating manual – Infrared thermometer BP15
1
2
3
4
2. IR sensor
4. Trigger
6. "MAX MIN" key
14 15 16 8
9
10
11
B - 2