Back view of charger Butler 4502
2.2
Rechargeable batteries
Before you use your Butler 4502 for the first time, you must first make sure
that the batteries are charged for 6-8 hours. The telephone will not work
optimally if not properly charged.
To change or insert a rechargeable battery:
1.
Slide the cover towards the bottom and then lift it up.
2.
Insert the batteries respecting the (+ and -) polarity.
3.
Replace the battery cover.
Back view of hand-set
The maximum standby time of the batteries is approx. 200 h and the
maximum talk time is 10 hours! In the course of time the batteries will start
to drain faster. The batteries must be replaced. 2 rechargeable batteries,
type AAA NiMH!
Topcom Butler 4502/Twin/Triple/Quattro
Topcom Butler 4502/Twin/Triple/Quattro
Power cable
Cover
Rechargeable
batteries
9