Progress PG1803 Notice D'utilisation page 30

30 Progress
The lower hinge cover (in the
accessories bag) makes sure that the
distance between the appliance and the
kitchen furniture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
6. Open the door. Put the lower hinge
cover in position.
4mm
44mm
7. Attach the appliance to the niche with 4
screws.
8. Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in
opposite case.
I
I
9. Attach the covers (C, D) to the lugs and
the hinge holes.
C
D
E
B
10. Install the vent grille (B).
11. Attach the hinge covers (E) to the hinge.
12. Connect the appliance laterally to the
kitchen furniture sidewall.
13. Disconnect the parts (Ha), (Hb), (Hc)
and (Hd).
Hb
Hd
14. Install the part (Ha) on the inner side of
the kitchen furniture.
E
Ha
Hc