Güde GRK 250/500 Traduction Du Mode D'emploi D'origine page 15

Glossary of Terms
Saw Shaft
Cross cut
Skew Cut
Bevel Square Cut
Double Bevel Square Cut
Revolutions per minute
Cutting line
Spring Set
Saw Kerfs
Improper Angular Adjustment
Resin (resin ingredient)
Material to be Cut
Support assembly
Support assembly:
Fixing the saw in the place of work
Safety instructions for the operator
Procedure
NOTICE: Never use saw discs if damaged.
Handling (Pic. 1, 3)
Never perform adjustment work when the appliance
is running. The appliance must always be unplugged
before adjusting! Risk of serious injury.
Skew cut
(13)
(13).
Scarf cut
(14),
(14).
Combination Cut (horizontal and vertical up to 45°)
Saw cuts combinations:
Saw Disc Replacement (Fig. 2, 3, 4)
CAUTION: Get down to the replacement only with the
saw unplugged and the saw disc at standstill!
(15)
Step by step instructions
15