brennenstuhl professionalLINE X 8000 M Mode D'emploi page 8

036320 X 8000 M_12000 M.qxp_036320 BA_X 8000 M_12000 M 06.08.20 15:18 Seite 8
Power socket
At the back side of the floodlight, there is a power socket
distributor. The power socket
ILLUSTRATED COMPONENTS
OPTIONAL STAND
Telescopic tripod ST 300
Telescopic tripod TS 250
Telescopic tripod TS 170
Telescopic tripod TS 300
MAINTENANCE AND CLEANING
The LED light contains no components that require maintenance. The light source of this lamp is not
replaceable. When the light source has reached the end of its service life, the entire lamp must be replaced.
The lamp must not be opened.
Switch the light off and disconnect the power plug before cleaning. Clean the light regularly with a dry, lint-free cloth.
To remove dirt, a damp cloth can be used. Do not use any solvents, caustic cleaning agents, etc.
8 www.brennenstuhl.com
C
is also functional when the light is switched off.
(not included in the scope of delivery)
Article no. 1170310
Article no. 1170610020
Article no. 1170610010
Article no. 9171991100
C
by means of which it can also be used as power
A Folding clamp
B On/Off and function switch
C Power socket
D Connection cable
B
C
A
D
180°