Panasonic LF-D321 Mode D'emploi page 44

ENGLISH
5
The computer detects the DVD-RAM device.
Click [Yes] when the computer has finished setting up the DVD-RAM device.
The computer restarts.
•
After restarting, Windows 2000 installs the DVD-
RAM device.
6
After the DVD-RAM device is installed,
Click [Yes] if the following message appears.
The computer restarts.
•
You can use the DVD-RAM/R drive after
rebooting.
•
To verify that the drivers were installed correctly,
refer to "Checks after installation" on pages 46
and 48.
If the message doesn't appear, verify that the drivers were installed cor-
rectly with the procedure described on pages 46 and 48.
44
VQT9473