Panasonic LF-D321 Mode D'emploi page 118

ENGLISH
MotionDV STUDIO 3.0LE installation
Windows 98 Second Edition
1
Insert the supplied CD-ROM (VFF0130) into the DVD-RAM/R drive.
The installation program starts automatically.
•
If the installation program does not start automatically, start it manually by following the pro-
cedure below.
(This assumes that the drive letter assigned to the DVD-RAM/R drive for CD-ROM media is E:.)
From the Start menu select [Run].
In the "Open" box, enter "e:\setup.exe".
Click [OK].
The installation program starts.
2
Click [MotionDV STUDIO DV capturing and
editing software].
•
The installer for MotionDV STUDIO starts.
•
Follow the on-screen instructions to proceed.
3
If the dialog at right is displayed, click
[Yes].
4
After confirming the license agreement, click
[Yes].
•
This is the license agreement for the 1394 driver update
module.
The license agreement for MotionDV STUDIO will be dis-
played when starting this software for the first time after
installing it.
5
If the dialog at right is displayed, click [Yes].
The computer now reboots.
•
You can use MotionDV STUDIO after rebooting.
118
VQT9473