ENGLISH
Parts and Functions
Front panel
Operation indicator lamp
Off:
No disc inside
Steady Green:
Disc inserted in DVD-RAM/R drive
Steady Orange: Recording, playback or tray opening/closing
Flashing Green: Error (See page 128.)
Manual eject hole
Used to manually eject the tray in the event it doesn't eject normally using the open/close button or
software commands.
Use this procedure as a last resort as it can cause malfunction.
Pulling out the tray
1. Turn off the computer.
2. Insert the emergency ejection pin (included) 4 or 5 times.
3. Remove the emergency ejection pin.
4. Open the shutter by hand.
5. Pull the tray out horizontally.
To close the tray
1. Turn on the computer.
2. Press the open/close button.
The tray may close automatically when you turn the computer on.
Open/close button
For opening and closing the tray.
Shutter
Rear panel
AUDIO output connector
For connecting the internal audio cable (included).
Jumper connector
For setting the DVD-RAM/R drive's Master and Slave (see page 24).
IDE connector
For connecting the internal IDE cable (not included).
Power supply connector
For connecting the power cable from computer.
Unassigned connector
(Continued on the next page)
21
VQT9473