SSS Siedle HTV 840-0 Notice D'utilisation page 6

English
Accepting door calls
The ring tones for the front door
and apartment door are different.
When a visitor presses the door
bell, the telephone rings and the
mute button flashes.
The call can be accepted within 1
minute of the last ring tone.
Actuating the door release
When you press the door release
button, the door from which the
last call came is opened for 3
seconds.
Switching on the light
When you press the light button,
the lighting is switched on,
provided this has been connected
by your electrical installer.
Muting the bell
By briefly pressing the muting
button, all bell tones are switched
off and back on again; The button
lights up red to indicate the
muting status. When a visitor rings
at the doorbell, the button flashes
as long as the in-house telephone
is in the muted status.
Ring tone volume
The ring tone volume can be
changed using a potentiometer
underneath the inscription inlay.
(Picture page xx)
Assigning the button functions
The functions of the buttons
depend upon the set
configuration. For more detailed
information, please contact your
electrical installer.
6
Video memory
The Multi Telephone with colour
monitor is equipped with a video
memory. The video memory is only
functional if activated by your
electrical installer. All visitor
pictures are saved with a date and
time. Up to 28 pictures can be
saved in the device. Once the
memory capacity has been used
up, the oldest picture is
overwritten each time a new
picture is taken. After a power cut,
pictures saved in the in-house
telephone are deleted.
Assigning the monitor buttons
The monitor is operated using a
5-way button. The Enter key is
used to switch on the monitor or
confirm a selected function.
The control buttons are used for
navigation within the different
menu levels.
Enter button Control buttons