Removing The Ups From The Pallet - Siel SAFEPOWER-EVO-HF 60 Manuel D'installation Et D'utilisation

R UPS
EMOVING THE
ATTENTION: FOLLOW THE INSTRUCTIONS BELOW TO AVOID PERSONAL INJURY AND/OR
EQUIPMENT DAMAGE.
SOME OF THE FOLLOWING OPERATIONS REQUIRE THE INTERVENTION OF TWO PEOPLE
Cut straps and remove from the cardboard box.
Remove the packaging material.
Remove the
NOTE: the accessories box may be located inside
the packaging or behind the UPS door.
The previously removed brackets can also to be used as slides. Fasten the slides to the pallet with the use of type A screws,
taking care to align the two wheels.
If necessary, unblock the front wheel brakes
Ensure that the door is fully closed.
ATTENTION: it is advisable to bring the UPS down by pushing from the rear, using great care and accompanying it
as it moves down. Given the weight of the equipment, this requires the work of two people.
NOTE: retain all packaging materials for future use
IV332 Rev.001 SIEL S.p.A.
Data di emissione: 2012-06-04
FROM THE PALLET
accessories container.
Remove the 2 brackets fastening the UPS to the pallet,
unscrewing the type A and B screws.
Pag. 71 di 272 + FR