6.
TechnicAl DATA
6.1.
conditions of use
Fluid temperature
-30 to 140°C max.
Temperature limits may depend on the
inserted probe. Refer to the relevant
operating instructions. If the temperature
ranges given for the holder and the
inserted probe are different, use the most
restrictive range.
Pressure class
16 bar max.
Pressure limits may depend on the
inserted probe. Refer to the relevant ope-
rating instructions. If the pressure ranges
given for the holder and the inserted
probe are different, use the most res-
trictive range.
8
English
Type 8200
Technicaldata
6.2.
Dimensions
Fig. 2:
Dimensions [mm] of the direct welding holder
Pg 13.5
Ø 13
Ø12,2
Ø 28