Materials; Installation, Commissioning; Safety Instructions - Burkert 8200 Manuel D'utilisation

Installation,commissioning
6.3.

materials

Part Material
Steel frame Stainless steel
O-ring EPDM
Seal pusher Stainless Steel
Type 8200
7.

insTAllATion, commissioninG

7.1.

safety instructions

danger
risk of injury due to high pressure in the installation.
• Stop the circulation of fluid, cut-off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to high fluid temperatures.
• Use safety gloves to handle the holder.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of hazardous products.
Warning
risk of injury due to nonconforming installation.
• Fluidic installation can only be carried out by qualified and
authorised personnel with the appropriate tools.
• Observe the installation instructions for the measuring device
inserted into the fitting or the adapter.
risk of injury due to an uncontrolled restart.
• Ensure that the restart of the installation is controlled after any
interventions on it.
English
9