Spare Parts And Accessories; Packaging And Transport; 11. Storage - Burkert 8200 Manuel D'utilisation

Sparepartsandaccessories
9. spAre pArTs AnD
Accessories
attention
risk of injury and/or damage caused by the use of unsuitable
parts.
Incorrect accessories and unsuitable spare parts may cause
injuries and damage the holder and the surrounding area.
• Use only original accessories and original spare parts from
Bürkert.
• By default, the direct welding holder is delivered with EPDM
o-rings.
• The adapter with order code 563477 is useful for mounting 120
mm oxygen or conductivity probes. The adapter is screwed onto
the holder and the probe into the adapter. When in place, the end
of the probe is almost flush with the top of the holder.
Sensor head
Adapter
Fig. 7: Direct welding holder with adapter
Type 8200
End of the probe and of the direct
welding holder almost flush
Direct welding holder
10. pAckAGinG AnD
TrAnsporT
note
Damage due to transport
Transport may damage an insufficiently protected part.
• Transport the holder in shock-resistant packaging and away
from humidity and dirt.
• Do not expose the holder to temperatures that may exceed the
admissible storage temperature range.

11. sTorAGe

note
poor storage can damage the holder.
• Protect the direct welding holder from cold, wet, direct heat
sources (sun, heaters), soiling, and mechanical disturbance.
• Storage temperature : -30 to 140°C.
English
15