Overview Figure; Power Connection; Safety Precautions - Storch VarioVac 50 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26

Power connection

(Fig. "001")
Before putting the device into
operation, check if the nomi-
nal voltage complies with the
details on the rating plate.
Your VarioVac 50 is fitted
with a protective conduc-
tor (earth). Make sure that
the electric network that you
want to connect the device to
is equipped with a protective
conductor connection.
Electrical appliances
The machine is connected to the mains supply by inserting the power plug into a suitable socket.
The electric circuit must comply with the applicable regulations that are in force in the country of use, it must fulfil the
relevant technical specifications and it must be properly earthed.
All electrical material used for the connection have to be suitable for the respective application and bear the "CE" mark
provided it is subject to Low Voltage Directive 2006/95/EC, and it also has to comply with the regulations that are in
effect in the country of use.
Failure to observe the warnings specified above may result in irreparable damage to the electrical equipment of the
machine and consequently to expiration of the warranty.
The manufacturer does not accept any liability for faults or malfunctions of the machine caused by sudden voltage fluc-
tuations outside the tolerances specified by the distributor (voltage ± 10% - frequency ± 2%).
General safety instructions
Please read through this operating manual carefully before using the machine.
Please pay special attention to the safety regulations.
This product should not be used for purposes other than those described in this manual under any circumstances;
STORCH shall not accept any responsibility for such use.
Please keep this manual safe for future reference!
Safety instructions
(Fig. "001")
- The device must not be operated in rooms filled with combustible gases.
- Do not use the VarioVac 50 to vacuum combustible or explosive substances.
- Always remove the mains plug before performing maintenance work.
- The manufacturer or Storch is not liable for incorrect use of the device, modifications
made to the the device or insufficient maintenance.
51
no
Petroleum
Translation of the original instruction

Publicité

Table des Matières
loading

Table des Matières