Control Direction Tests; As3X ® Control Direction Test - Horizon Hobby UMX Yak 54 3D Manuel D'utilisation

Control Direction Tests

Traditional Control Direction Test
You should bind your aircraft and transmitter before doing these tests. Move the controls on the transmitter
to make sure the aircraft control surfaces move correctly and in the proper direction. Make sure the tail
linkages move freely and that paint or decals are not adhered to them.
AS3X ® Control Direction Test
This test ensures that the AS3X
1. Advance the throttle above
25% to activate the AS3X
system.
2. Fully lower the throttle.
3. Move the entire aircraft
as shown and ensure the
control surfaces move in
the direction indicated in
the graphic. If the control
surfaces do not respond
as shown, do not fly
the aircraft. Refer to the
receiver manual for more
information.
Once the AS3X system is active,
control surfaces may move
rapidly. This is normal. AS3X
is active until the battery is
disconnected.
®
control system is functioning properly.
Aircraft
movement
AS3X Reaction
EN
7