Programming The Special Functions - Reely ROAD Carbon Fighter Notice D'emploi

b) Programming the Special Functions
The speed controller is already programmed with the best pre-settings in the factory. Usually, no changes
are required for the first attempts at driving.
The speed controller unit has many different programming
options, e.g. adjustment of the braking strength, a low-voltage
protection function for LiPo rechargeable batteries and many
more.
The values marked grey in the table are the settings pre-
programmed ex works (at the time these operating
instructions were written). However, these may change for
later versions of the speed controller.
The function (see „Function" column in the table to the left)
currently selected for settings is always indicated by the green
LED.
The value selected is indicated by the red LED (see right
area of the table).
The following pages explain how to activate the programming
mode and how to make settings; they also describe all the
functions.
51