Häfele FT 200 Instructions D'utilisation page 30

Prerequisites:
1. Plug in the power plug.

Acoustic signal is heard. LED flashes green
for max. 5 seconds.
3. Remove programming key card.

LED flashes red for max. 5 seconds.
If the start-up time window is exceeded:
1. Pull the power plug.
2. Wait until the LED goes out.
3. Restart the start-up process.
30
Tag-it ™ISO
Programming key card
5 s
5 s
Tag-it ™ISO
x
Clearing key card
2. Hold the programming key card in front of the
antenna during this 5-second period.

Acoustic signal is heard.
x
4. Hold the clearing key card in front of the
antenna during this 5-second period.

Acoustic signal is heard. LED illuminates
red. System is in operation.