Corghi ERCO 500 Manuel D'utilisation page 43

machine.
Before operating the lift, operators must be familiar with the position and function
of all controls, as well as with the machine features shown in the chapter
"Operation and use"
1.4
WARNINGS
Unauthorised changes and/or modifications to the machine relieve the
manufacturer of any liability for possible damages to objects or people. Do not
remove or make inoperative the safety devices, this would cause a violation of
safety at work laws and regulations.
Any other use which differs from that provided for by the manufacturer of the
machine is strictly forbidden.
The use of non genuine parts may cause damage to people or objects
DECLARATION OF WARRANTY AND LIMITATION OF LIABILITY
The manufacturer has paid proper attention to the preparation of this manual. However, nothing
contained herein modifies or alters, in any way, the terms and conditions of manufacturer
agreement by which this lift was acquired, nor increase, in any way, manufacturer's liability to the
customer.
Every effort has been made to ensure that the information contained in this manual is correct,
complete and up-to date. The manufacturer is not liable for any mistakes made when drawing up
this manual and reserves the right to make any changes due the development of the product, at any
time.
TO THE READER
43