What To Do If - Becker Centronic EasyControl EC242-II Notice De Montage Et D'utilisation

Assembly and Operating Instructions
Fault
Drive is not functioning.
Requested drive is not
functioning.
32

What to do if ...?

Cause
1. Battery is dead.
2. Battery is inserted
incorrectly.
3. Receiver is out of
range.
4. Transmitter is not
programmed on the
receiver.
Incorrect channel
selected.
Remedy
1. Insert new battery.
2. Insert battery correctly.
3. Reduce distance from
the receiver.
4. Programme transmitter.
Select correct channel.