Emissions; Scope Of Supply; Safety Devices - Mafell K 85 Ec Traduction De La Notice D'emploi Originale

2.4 Emissions

The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the saw blade included in the standard equipment.
2.4.2 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s

2.5 Scope of supply

Portable circular saw K85 Ec complete with:
1 carbide-tipped circular saw blade Ø 237 mm (9 21/64 in.), 12 teeth
1 riving knife / splitter (thickness 2.0 mm / 5/64 in.)
1 parallel stop for item No. 918202, 918230, 918231, 918232, 918235
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"
1 carrying case for item No. 918202, 918230, 918231, 918232, 918235
Cross-Cutting System KSS80Ec/370 complete with:
1 carbide-tipped circular saw blade Ø 237 mm (6 1/4 in.), 12 teeth
1 riving knife / splitter (thickness 2.0 mm/3.32 in.)
1 parallel stop
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"

2.6 Safety devices

Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
L = 91 dB (A)
PA
K = 1,5 dB (A)
PA
L = 102 dB (A)
PA
K = 1,5 dB (A)
PA
2 .
The machine is equipped with the following safety
devices:
- Upper stationary saw guard
- Lower retractable saw guard
- Large base plate
- Handles
-21-