Technical Data; Emissions; Scope Of Supply - Mafell MT55 18M bl Traduction De La Notice D'emploi Originale

2.3 Technical data

Nominal voltage
Saw blade speed while idling
Cutting depth 0° / 45°
Tilting saw unit
Saw blade diameter max./min.
Saw blade base body thickness
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight with rechargeable battery (without parallel
stop)
Dimensions (W x L x H)

2.4 Emissions

The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the saw blade included in the standard equipment.
2.4.2 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s

2.5 Scope of supply

Plunge cut saw MT55 18M bl complete with:
1 carbide-tipped circular saw blade Ø 162 mm (6.38 in.), 48 teeth
1 parallel stop
1 service tool in bracket on the machine
1 carrying case
1 operating manual
1 folder "Safety instructions"
1 position indicator MT-PA
1 chip bag
1 charger APS 18M for Art.No. 91B401, 91B421, 91B425
18 V
4850 rpm
0 – 57 mm / 0 – 40.5 mm
-1° / 0° – 48°
162 /149 mm (6.28 / 5.86 in.)
1.2 mm (0.05 in.)
1.8 mm (0.07 in.)
20 mm (0.79 in.)
35 mm (1.38 in.)
4.5 kg (9.92 lbs)
250 x 330 x 215 mm (9.84 x 12.99 x 8.46 in.)
L = 90 dB (A)
PA
K = 3 dB (A)
PA
L = 101 dB (A)
WA
K = 3 dB (A)
WA
2 .
-21-