Ingersoll Rand ENL 10 Série Instructions De Montage Et De Service page 11

wrong
80446222
9. INSTALLATION
Correct
ingersollrandproducts.com
Pressure differences!
Each condensate accumulation point must be drained
separately.
Continuous slope!
Avoid a water pocket when installing the feed pipe
Deflector area!
If drainage is to be carried out directly from the pipe,
deflection of the air flow will be useful.
Ventilation!
If the slope in the inlet line is not sufficient or if any
other inflow problems occur, a venting line needs to
be installed.
EN
11